Introduction of Nitrogen Compressor

Nitrogen compressor equipment:

1. Product Introduction:

Large nitrogen compressors are equipment used to compress gas and increase the pressure and temperature of the gas. According to different uses, they are divided into two types: large industrial nitrogen compressors and small laboratory nitrogen compressors.

Among them, large nitrogen air compressors for industrial use are large in size and light in weight, while small nitrogen air compressors for laboratory use are small in size and heavy in weight.

2. Working principle: There are two pistons in the cylinder, each with an exhaust hole and an exhaust pipe. When the gas in the cylinder enters the cylinder through the intake hole, the gas is compressed and the pressure increases; when the piston moves downward, the gas is discharged to reduce the pressure in the cylinder to a certain value and then discharged by the exhaust valve.

3. Main features:

(1) Compact structure: The single-stage crank double-cylinder structure and the integrated oil-free lubrication system greatly reduce the height and weight of the whole machine; the high-precision gear meshing mechanism is used to drive the rotor to rotate and drive the connecting rod to reciprocate to achieve continuous operation of the working cycle;

(2) Low noise: The use of new noise reduction devices and noise-reducing materials effectively reduces the vibration and noise of the whole machine during operation; the shock-absorbing rubber gasket can effectively absorb vibration energy and reduce noise pollution;

(3) Stable performance: The use of advanced technology and high-quality accessories ensures the quality stability and reliability of the product.

Nitrogen compressor equipment features:

1. Small size and light weight: small footprint and easy to move; the weight is only 1\/10 of the fan of the same specification, and the required installation space is very small. It can be installed under the floor, on the ground or on the wall.

2. Low noise: The noise during operation is only 1\/3 of the fan noise, which is an ultra-quiet product (lower than the air compressor noise). It uses high-quality motors and advanced vibration and noise reduction technology to effectively reduce vibration and noise.

3. Energy saving: Compared with the centrifugal fan of the same power, the power consumption is only 1\/3-1\/2; the operating cost is low.

4. Long service life: The whole machine is assembled with high-quality imported components (key components are imported from abroad), with stable and reliable performance and convenient maintenance.